Send Message
China Gwell Machinery Co., Ltd 86- 512-53660797 salem@gwell.cn
EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine

  • High Light

    EVA POE Solar Encpasulation Film Machine

    ,

    EVA Sheet Extrusion Line

    ,

    eva film making machine

  • Product Name
    EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine
  • Machine Type
    Cast Film Machine/PV Solar Film Machine
  • Output Of The Machine
    300-700kg/h
  • Suitable Material
    EVA/POE
  • Width
    1100mm 1200mm 1300mm 2200mm 2400mm 2600mm
  • Thickness Scanner
    Depends On Customer's Demand
  • Screw Design
    Single Screw Design
  • Film Structure
    Single-layer Film / Three-layer Film
  • Country Of Origin
    Jiangsu Province , China
  • Market Share
    Over 80% Of This Machine In Chinese Market
  • Warranty
    One Year
  • After-sales Service
    Installation And Machine Debug
  • Place of Origin
    China
  • Brand Name
    GWELL
  • Certification
    CE
  • Model Number
    GWS120/GWS160/GWS180
  • Minimum Order Quantity
    1 set
  • Price
    Negotiable
  • Packaging Details
    STRETCHING FILM, PLASTIC FILM PACKAGE, WOODEN CASES PACKAGE FOR KEY PARTS
  • Delivery Time
    90 days
  • Payment Terms
    L/C, T/T
  • Supply Ability
    200 sets per year

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine

 

1. Introduction of EVA Solar Cell Encapsulation Film Production Line

(1) The EVA Solar Cell Encapsulation Film Production Line of Gwell Machinery Co., Ltd. adopts the casting process to produce EVA Solar Cell Encapsulation Film Production Line. The main raw material is imported vinyl acetate copolymer EVA , added with imported plastic additives and then heated, cast and extruded. The adhesive film is non-sticky at room temperature, and it is convenient for cutting operation. After hot pressing, thermal cross-linking curing and bonding enhancement reaction will occur, resulting in permanent bonding and sealing. It is a novel thermosetting hot-melt adhesive film.

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 0

 

(2) Special EVA Solar Cell Encapsulation Film Production Line for solar modules (photovoltaic modules) and related solar products is used to encapsulate solar panels, which is non-sticky at room temperature and easy to operate. After hot pressing, thermal cross-linking will occur due to chemical and bonding enhancement reaction to produce a permanent adhesive seal. Product features: high light transmittance/high adhesion strength/high light and heat stability/superior volumetric electricity group rate.EVA Solar Cell Encapsulation Film Production Line

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 1

 

(3) Compared with EVA film, the biggest advantage of POE film is low water vapor transmission rate and high volume resistivity, which ensures the safety and long-term aging resistance of the module in high temperature and high humidity environment, and ensures long-term use of components. Specifically, the superior performance of the EVA Solar Cell Encapsulation Film Production Line EVA film is that the POE film is a copolymer of ethylene and octene, is a saturated fatty chain structure, and has fewer tertiary carbon atoms in the molecular chain, showing good weather resistance, UV aging resistance, excellent heat resistance and low temperature resistance, so POE film has better aging resistance than EVA film. Through modification methods such as photo-grafting polar monomer, plasma surface treatment or reactive grafting modification to POE, it can improve the adhesion of POE film and glass, backplate and other materials, and has excellent interfacial adhesion performance.

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 2

 

(4) It is suitable for high-efficiency double-sided batteries, which can effectively enhance the conversion efficiency of the battery. Compared with ordinary single-sided power generation modules, it increases the power generation rate and reduces the cost of electricity. At the same time, the modules can be placed vertically and have more utilization methods. The POE film has a lower water vapor transmission rate and greater cohesion. It is more suitable for double-glass modules, so that the produced double-glass modules do not require edge sealing and have a longer service life.

(5) However, the output of POE film is smaller than that of EVA film, and its raw materials are expensive. But it is the future direction of development.

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 3

 

2. Features of EVA Solar Cell Encapsulation Film Production Line

1) High transparency and high adhesion can be applied to various interfaces and used for bonding glass and silicon wafers.

2) Good durability can resist high temperature, moisture, ultraviolet rays and so on.

3) Easy to store. Stored at room temperature, the adhesion of EVA is not affected by humidity and water-absorbent film.

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 4

 

3. Characteristics of POE polyolefin

1. POE has the general characteristics of thermoplastic elastomers. The soft chain curling structure of octene and the crystalline vinyl chain are used as physical crosslinking points, making it both excellent toughness and good processability;

2. The price is low and the relative density is small, so the volume and price are low;

3. Excellent heat resistance and cold resistance, and a wide using temperature range;

4. Weather resistance, good aging resistance, because there are no unsaturated double bonds in the molecular structure of POE plastics, it has excellent aging resistance;

5. Oil resistance, compression permanent deformation and abrasion resistance are not good;

6. POE plastics have narrow molecular amount distribution, good fluidity, and good compatibility with polyolefins;

7. Good fluidity can improve the dispersing effect of the filler and at the same time increase the weld line strength of the product.

 

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 5

 

4. Comparison and introduction of EVA Solar Cell Encapsulation Film Production Line

Because the EVA film has the features of low strength, high water vapor transmission rate and water absorption rate, and its poor weather resistance, it needs to be edge-sealed when used on double glass modules. However, water vapor will still pass through during normal use, resulting in the film atomization which affects the light transmittance and reduces the power generation of the module.

And POE has a new type of polyolefin thermoplastic elastomer with narrow relative molecular mass distribution and narrow comonomer distribution and controllable structure.

 

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 6

 

There are currently two types of POE film on the market. One is a non-crosslinked polyolefin packaging material that does not contain a crosslinking agent and uses a combination of functional polymers to make the material's heat resistance and adhesion meet the requirements of use. The other is a cross-linked polyolefin encapsulating material containing peroxide cross-linking agent or silane cross-linking agent and tackifier. This kind of film is similar to EVA film in terms of production technology and process.

Compared with EVA film, the biggest advantage of POE film is low water vapor transmission rate and high volume resistivity, which ensures the safety and long-term aging resistance of the module in high temperature and high humidity environment, so that the module can be used for a long time. Generally speaking, the performance of POE film is superior to EVA film.

 

5. Performance characteristics of EVA Solar Cell Encapsulation Film Production Line

(1)The cast extruder adopts EVA special single screw extrusion and POE special single screw extrusion. The screw barrel constant temperature circulating water cooling system solves the technical difficulties of EVA Solar Cell Encapsulation Film Production Line

(2)The roller body adopts double-sided embossing, and solves the technical difficulties of the film sticking to the roller.

(3)The cooling part adopts cooling rollers and stress-relieving cooling beds to make the film run smoothly and fully shaped to ensure that the shrinkage rate is less than 3%.

(4)The whole line adopts PLC automatic control to realize the operation of man-machine interface.

(5)The production line is equipped with an online quality monitoring and control system to ensure the product qualification rate.

(6)Patented design micro-tension winder, the line speed of the whole machine production line can reach 18m/min

 

6. Introduction of EPE three-layer co-extrusion solar film

EPE=EVA+POE+EVA, this is a three-layer co-extruded solar film. Compared with single-layer EVA or POE film, it has the advantages of these two products and saves more costs.

 

Specification of EVA Solar Cell Encapsulation Film Production Line​: 

 

Extruder type GWS160 GWS160 GWS180 GWS180
raw material EVA ,POE EVA ,POE EVA ,POE EVA,POE
Product width 2200mm, 2400mm, 2600mm
Product thickness 0.2mm -1mm 0.2mm -1mm 0.2mm -1mm 0.2mm -1mm
Maximum linear speed 10m/min ,12m/min,15m/mn

 

 

Extruder type Co-extrusion GWS160+GWS160 Co-extrusion GWS180+GWS160 Co-extrusion GWS180+GWS180
raw material EVA ,POE EVA ,POE EVA,POE
layers A,A/B/A
Product width 2400mm,2600mm
Product thickness 0.2mm -1mm 0.2mm -1mm 0.2mm -1mm
Maximum linear speed 15m/min, 16m/mn, 18m/min

 

 

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 7


                   

 

 

 


EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 8



 

Gwell Machinery is a high-tech enterprise, committed to providing customers with plastic sheet, board, film and other extrusion lines. Gwell can provide turnkey projects, such as stone paper project, EVA solar film project, PP building formwork equipment,etc. Gwell has a strong technical equipment strength and key capacity, committed to high-end product development, international market development. “Realize customer value" is the company's long-term business philosophy.The manufacturing bases of the company are located in Taicang, Suzhou, which is close to the beautiful scenery of Shanghai, Yancheng Dafeng, the hometown of Red-crowned crane, and Nantong, the hometown of Education and longevity in China. It covers a total area about 150,000 square meters. It has an annual production capacity of more than 200 extrusion lines of various types of sheet and board.

EVA Solar Cell Encapsulation Film Production Line EVA Solar Film Making Machine 9